[. . . ] GB IMPORTANT: Do not cover the appliance during functioning, this could cause a dangerous temperature increase of the radiator. GENERAL FEATURES Remove the appliance from the packaging, turn upside down and rest on the polystyrene. [. . . ] 00, turn the numbered timer disk clockwise until the number 10 on the disk coincides with the pointer on the timer. Set the periods of time when you want the appliance to work by pushing the teeth inwards. This will leave visible sectors which correspond to the periods of operation. When set, the radiator will operate automatically each day during the times programmed (important: the radiator must always be plugged into the socket). - To change the programming, move the teeth back into the initial position and set the new periods of functioning. - If you want to make the appliance operate without programming, push all the teeth into the centre. In this case, to turn the appliance off completely, as well as turning the switches off, you must also unplug it from the mains to avoid continued operation of the timer. MAINTENANCE Before carrying out any operation on the radiator, unplug from the electric mains and wait for it to cool. If necessary remove concentrations of dirt using a vacuum cleaner (fig. IMPORTANT - Never use the radiator near a bath, shower, basin or swimming pool. - When you start the radiator for the first time, leave it operating at maximum power for at least two hours. During this operation, ventilate the room well to eliminate the "new" smell emanating from the appliance. [. . . ] ATTENTION: in order to avoid any danger caused by an accidental resetting of the safety system, this appliance must not be powered through an external timer. IMPORTANT: Never for any reason cover the appliance during operation as this could lead to dangerous overheating. [. . . ]